Conclusion

In conclusion, this has been a very successful blog, project, and course to be enrolled in. We have met all goals and expectations set for ourselves in the design proposal, and are proud of it. The final report and final findings can be found in the right most corner of the tabs at the top of this page under the blog title. Thank you, and enjoy your summer!

-Peter Patrick
-Brian Smolsky
-Trevor Allaghi

The group recently created the wiring diagram that displays how the CeeLites must be wired to the car. The diagram was created using AutoCAD. 

Week 9 Advancements

The wiring diagram for the product has been drawn up, and work has been done on the final report/presentation. The final report is due in one week, and will be published by then. The wiring diagram will be posted shortly.

Finished CAD

We recently finished the CAD drawings for the seat and CeeLite. The CAD provides a clear image of where the light will be placed on the seat.

Week 8 Progress

The lab period of week eight was dedicated to compiling and writing the final report. We also completed the ProEngineer drawings of our product. We ran into complications with the dimensions and coloring of the eat/panel, but we figured it out. This next week will be dedicated to the wiring diagrams and finishing up the final report.

We just finished the C.A.D. Model for the car seat of which we are planning to attach the CeeLite. Screenshots are shown below.

Week 7 - Continued research

Today we completed most of our research and experimentation with the CeeLite products. From that research we determined that we can directly wire the power source of the CeeLite to a car battery, and decided which brightness level to use in the final product.